socalfunplaces Chapter 121
Chapter 121
The Great Devil's new movement instantly completely destroyed the atmosphere of the celebration banquet that night, and everyone was somewhat aware of the somewhat tense atmosphere, which spread in the banquet hall.
First of all, there are the old and cunning and professionally sensitive Minister Ding and Director Li.
The two sat together, and when Chief Engineer Zhang finished answering the phone and rushed to the bathroom with a nervous expression, the two looked at each other and nodded slightly, meaning that something must be happening.
Although Minister Ding and Director Li are now engaged in special work in intelligence and internal defense, because both of them were transferred from the army earlier, many comrades-in-arms and veteran leaders are still in office, and many of them have held quite high positions. Among them, several are also bigwig-level figures who preside over the affairs of a military region, and have always maintained good working relationships and personal friendships in peacetime.
Therefore, the two are more like spokespersons for the interests of the military in many matters, unless this matter directly conflicts the interests of the department they govern.
Since Kong Bai came up with a 1-nanometer lithography machine and an improved jet engine, his name has spread among the military-level bigwigs.
Many people directly or through other channels, found Minister Ding and Director Li, and asked them to act as an insider, timely to their side, and convey all the movements of Kong Bai, so as not to have new technologies and new equipment come out, and the men under their own command are stupidly going to the old tactics and tactics!
In addition, please also help them talk more, if there is any practical new equipment, give priority to let them be installed, even if they cannot be installed first, it is okay to try it out, and always summarize something from the trial process of new equipment, so as to facilitate their troops, adapt to the new war mode in the future as soon as possible, and avoid being left behind!
Especially Director Li, one of his half-brothers, is now in charge of the East China Sea Fleet of the New Dragon Kingdom, so he naturally turned his elbow towards his eldest brother.
Director Li was also a dazzling star seed when he served in the special forces of the Navy, and later because of the rule that relatives could not serve in the same department, he chose to make way for a more promising eldest brother and transferred to the current department.
This is also the reason why Director Li can easily mobilize the HNA engineering troops, and of course, it is also the main reason why he was stationed in Zhonghai and fully presided over a series of related work related to Kong Bai's internal guard carried out by their department in Zhonghai.
In the banquet hall, as someone received a call and left in a hurry, the atmosphere in the hall was obviously abnormal, and the two of them muttered a little analysis, and they could roughly judge that there was only about one Great Demon King who could mobilize so many seemingly unrelated departments at present!
So the two of them didn't sit at the wine table anymore, got up and walked out of the hall, and participated in the meeting in the corridor with a dead face!
"Robots? The big devil is going to engage in robots next? When
Minister Ding and Director Li heard such sudden news, they felt that the whole person was a little confused!
"What kind of robot is he going to do?" Industrial automation? Or the kind with the ability to act independently? Or a micro-robot? Is it the civilian sphere or the military sphere? Minister
Ding has long been involved in intelligence work, and economic and technical intelligence is also an important area of his work, so the general classification of robots is still known.
No one could answer the series of questions he asked.
Vice Dean Wang was helpless, so he simply said what Qiao Changsheng had arranged for himself, and then added:
"I feel that the current Great Demon King is just determining the next research direction!"
"The information he needs shows that he has not yet formed a specific research plan!"
"So needless to say that we don't know, it is estimated that if you ask the Great Demon King now, his answer is similar!"
"If he had a direction, he wouldn't let us do so much technical information!"
"Besides, robots are actually not much mysterious, those automatic machine devices that perform work, in a broad sense, are robots, the difference is whether the function is powerful or not, and the degree of intelligence!"
Minister Ding and Director Li looked at each other, and said in a deep voice
, "Think about it, when did the Great Demon King come up with something that wasn't earth-shattering?"
"So, I think that this time, what he wants to engage in must also be an unusual robot!"
"Therefore, this time, we still have to turn the impossible into a possibility, and go all out to meet all the requirements of the Great Demon King!"
So, a few people didn't have the heart to continue drinking to celebrate their success, so Secretary Song spoke to the hotel, then found a conference hall and began to meet and discuss!
It is not impossible to complete the full construction of the Demon King Building within 12 days, it is a matter of spending more money!
Find a large group of construction teams to enter the site at the same time, each construction team is responsible for one floor or a separate project, or even a construction team per room!
If you do such a thing, needless to say 12 days, even a few days less, you can surprise out, but this cost will cost at least 50% more!
The second in command of Zhonghai immediately clapped, no matter the cost, but also to complete the requirements of the Great Devil King!
So, this matter was decided.
Then the Ministry of Nuclear Industry expressed its position, immediately organized the subordinate enterprises of the Ministry and began to produce the thorium-232 nuclear power battery required by the Great Devil to ensure its timely delivery!
But about the construction of the anti-radiation project of the battery center of the Demon King Mansion, as well as the installation and commissioning of the power exchange equipment and the power automatic input device, he could not do anything!
Because the enterprises belonging to the Ministry of Nuclear Industry are mainly in the Great Northwest, and as for the nuclear power plants in the southeast, there is no such construction capacity!
Director Li came forward to take over this task, and he came forward to contact the HNA engineering troops to enter the construction site.
The construction force of HNA engineering troops, especially the construction force of this special project, is the top in the country!
The Ministry of Nuclear Industry only needs to draw construction drawings and send a few engineers who are familiar with the specific business to guide the construction on site!
Then, the pressure came to Zhonghai Optoelectronics Institute and Old Master Wang!
The first is chip manufacturing.
The whole process of chip production is very complicated!
Figuratively speaking, the process of chip manufacturing is like building a house with Lego, first have a wafer as the foundation, and then go through a series of chip manufacturing processes stacked layer by layer to produce the chip you want.
A chip, from a wafer to a chip, simply put, roughly requires the following process
: 1. Wet cleaning: It is cleaned with chemical reagents to ensure that there are no impurities on the surface of the wafer.
2. Deposition: Usually the semiconductor material thin film is deposited on the wafer.
3. Photoresist coating: coating the photosensitive material "photoresist" or "photoresist" on the wafer.
4. Exposure: The laser beam will be projected onto the wafer by making a mask of the pattern, and the photoresist will undergo a photochemical reaction, and the place that is illuminated will be easily washed off, and the place that is not illuminated remains as it is, and the pattern is imprinted on the wafer.
5. Ion implantation: add different impurities at different positions of the wafer, and different impurities form FETs according to different concentrations and positions.
6. Dry etching: Many of the patterns carved by the lithography machine before are etched for ion implantation, and now they must be washed off with plasma.
7. Wet etching: further etching with chemical reagents. After dry and wet etching, the underlying FET has been made.
However, the above steps generally need to be done at least 18 times, up to more than 100 times, to meet the design requirements of the chip.
Then after a series of complex processes such as plasma washing, heat treatment, chemical vapor deposition, physical vapor deposition, molecular beam epitaxy, electroplating, surface treatment, wafer testing, wafer grinding, etc., the wafer can be packaged at the factory.
The wafer goes to the chip packaging plant, where it is tested, cut the wafer to obtain a single chip before packaging the chip, and then the next step is packaging.
The package not only plays the role of mounting, fixing, sealing, protecting the chip and enhancing the overall electrical and thermal performance of the chip, but also connects to the pins of the package shell with wires through the contacts on the chip, and these pins are connected to other devices through the wires on the printed circuit board, so as to realize the connection between the internal chip and the external circuit.
The quality of packaging technology also directly affects the performance of the chip itself, and the design and manufacture of the motherboard connected to it, so it is also an important step related to the overall performance of the system.
In fact, the production process of specific chips is far more complicated than the steps mentioned above, especially the 1-nanometer chip, and its production process is particularly difficult!
At present, the 1 nm lithography machine has just been manufactured, and the industrial control software of the lithography machine has also been greatly optimized by Dabai on the basis of the existing software, but what kind of effect can be achieved, Chief Engineer Zhang is not sure!
It is necessary to ensure that the production of a large number of one-nanometer chips is completed in such a short time, and it is necessary to rush forward as much as possible, because the packaging test will take several days to complete!
Now Chief Engineer Zhang is forced by so many people at the scene, either eager or anxious, and a sense of powerlessness that wants to cry without tears surges up!
The Great Demon King can really afford to look at Zhonghai Optoelectronics Institute, and he can afford to Zhang someone!
Why is it that every time the task of forcing people to death falls on their heads?
I already knew that I was not so eager to take over the advanced lithography machine technology!
General Engineer Zhang secretly regretted in his heart, but he had to stand up his face, he forced himself to squeeze out a smile, and said with a little gritted teeth:
"We will tomorrow..."
Right now! I will now gather technical personnel and start sorting out the relevant technical information of chip design, overall architecture, packaging testing and on-board components!
"Tomorrow morning, we will go to ask Teacher Dabai for advice and get a nanochip out as soon as possible!"
"Also, Vice President Wang, regarding the technical information such as motherboards, memory, and hard disks, you have to make a contribution from your old side!"
Vice President Wang also smiled bitterly, nodded, and agreed!
Then, everyone roughly divided the other things arranged by Qiao Changsheng, left each other in a hurry, and began to plunge into the overnight busyness again!