socalfunplaces Chapter 111: Full Machine Inspection
Chapter 111: Full Machine Inspection
"Xiao Li, you've come just in time!" Director Yang came up to me with a smile, "I was just looking for you. We have to have a general consultation for the whole factory today and check all the machines and equipment. Do you think it's okay?"
Li Yang was delighted to hear that. He immediately nodded and said, "Okay! That's exactly what I want. Director, just wait and see. It won't be long before all the machines in our factory are brand new!"
Secretary Zhang also patted Li Yang on the shoulder with a smile: "Little Li, it's good that you have this enthusiasm. The future development of our steel mill depends entirely on young people like you."
In this way, Director Yang and Secretary Zhang's encouragement raised Li Yang's enthusiasm to the highest point. He couldn't wait to go to the technical department office and immediately called everyone to a meeting.
"Comrades, starting from today, we will conduct a thorough inspection of the machinery and equipment in the entire factory." Li Yang said firmly, "This is not only related to the production of our factory, but also to the dignity of our working class. Everyone must show 100% enthusiasm and work with me to complete this glorious task!"
Li Yang's words immediately drew warm applause. All the engineers and technicians were eager to try.
"Don't worry, Mr. Li, we will do our best!"
"Yes, if we follow Li Gonggan, we will go through fire and water without hesitation!"
Everyone was talking at once, and everyone was full of fighting spirit. Li Yang was overjoyed when he saw this, and immediately told everyone to take their notebooks and get ready to go.
In this way, Li Yang led a large group of technical personnel and began to inspect all the workshops in the factory.
Soon, Li Yang and his team arrived at Workshop No. 1.
At this time, Yi Zhonghai was sitting beside the lathe in a daze, bored. When he stole a glance at Li Yang, his face suddenly turned ugly.
"What's so great about this little bastard?"
Yi Zhonghai cursed in his heart, "You think you are a top student just because of your little cleverness? Humph, now you leave me aside, let's see how arrogant you will be in the future!"
Yi Zhonghai looked at Li Yang who was surrounded by the crowd and felt furious.
However, he had to suppress his anger and hide aside with a gloomy face.
Just like that, under Yi Zhonghai's resentful gaze, Li Yang led everyone to conduct a careful inspection of Workshop No. 1.
As time went by, Li Yang's presence was seen in every corner of the steel mill. Under his leadership, the technicians eagerly recorded and measured, fearing that they would miss any areas that could be improved.
Sweat soon soaked everyone's clothes, but no one felt tired. Everyone just hated that they didn't have enough eyes and their notebooks were not thick enough, and they wanted to learn all the skills that Li Yang taught them.
Li Yang also taught his unique skills without reservation. He patiently explained the structure of each machine and demonstrated the key points of each operation. His love and persistence for technology infected everyone present.
In this way, several hours passed quickly. When Li Yang led everyone out of the last workshop, everyone's notebook was densely filled with various data and notes.
At this time, Li Yang was already sweating profusely, but the smile on his face was brighter than ever.
"Comrades, thank you for your hard work!"
Li Yang looked around and said excitedly, "Although we have only made a start today, I believe that it won't be long before we can completely transform the machinery and equipment in the steel mill! Let those foreigners see what the wisdom of the working class is!"
"Yes! Following Mr. Li, we are like a tiger with wings!"
"Mr. Li's words are orders. What are you waiting for? Let's get to work!"
Amid thunderous cheers, Li Yang began to explain the problems with the machine to the technicians and engineers.
"Comrades, please listen carefully." Li Yang picked up the notebook and said in a serious tone, "Through the inspection this morning, I found that most of the machinery and equipment in our factory have the problem of aging parts. These parts have been running at high load for a long time, and it is time to replace them. If we don't deal with it in time, I am afraid it will affect our production efficiency and even cause safety accidents!"
As soon as Li Yang finished speaking, a lot of discussion broke out at the scene. Everyone was talking and lamenting that the machine really needed a good repair.
Li Yang walked to an old lathe, pointed at the gears on it and said: "You see, there are big problems with this transmission structure. Due to the wear of the gears, the transmission efficiency is greatly reduced, resulting in unstable operation of the machine and occasional jams."
Then, Li Yang came to a milling machine and knocked on the rusty milling cutter on it: "And this one, the cutter is so blunt, how can the parts processed by it be accurate?"
In this way, Li Yang took everyone around the workshop and found problems of one kind or another in almost every machine.
Some of these problems are due to inadequate daily maintenance, some are due to design flaws, and some are due to being used for too long and should have been eliminated long ago.
Faced with Li Yang's explanation, the engineers present were dumbfounded, and even the old masters were secretly shocked.
They admired Li Yang's vision and his understanding of machinery from the bottom of their hearts, but at the same time they felt ashamed of their own ignorance.
“So, how do we solve these problems?”
Someone couldn't help but ask.
Li Yang smiled when he heard that, picked up a pen and started drawing on the notebook.
In just a few seconds, he sketched out the structure diagram of a machine tool and marked every part that needed to be replaced or improved.
"We can start with the transmission structure, such as replacing the gears here with helical gears to reduce the meshing clearance, so as to avoid the jamming problem."
As Li Yang was drawing, he said, "As for the cutting tools, I recommend using solid carbide, which is both wear-resistant and can ensure processing accuracy. Of course, for large parts like the base, I'm afraid I can only copy them as they are, and the material must be of the best quality to ensure strength and rigidity."
Li Yang talked for a long time, explaining the transformation plan of each machine clearly. Everyone was confused, but also very excited.
Only then did they realize that mechanical design was so particular and that they had been working as mechanics for nothing for so many years!
Li Yang saw that everyone was listening attentively and knew that they had understood the key points. He immediately ordered: "Okay, now that we have a plan, let's act quickly. From now on, everyone will go to the workshop to process the corresponding parts according to my drawings. I require that all the accessories must be prepared within three days!"
"clear!"
Everyone agreed in unison and immediately dispersed happily.
In the following period, the entire steel rolling mill was bustling with activity and everyone was busy.
Technicians held blueprints in their hands and ran around to instruct workers on processing. Workers sweated profusely, cutting iron like mud on planers and milling machines.